DyeBold™ Machine

Dyeing Made Easy.

 It is finally here! The machine that is disrupting the carpet dyeing industry.  Now large jobs can be done at a fraction of the time, while ensuring sufficient heat for best dye "strike-ability" (dye absorption and adherence to the fiber). 

Compact, lightweight, yet powerful, this features adjustable psi and 2 independently activated in-line heaters (Total of 4000 Watts of power) to optimally deliver the dye solution, for best color absorption. Ideal for:

FULL ROOM DYEING - RUG OVER DYEING - SIDE MATCH COLOR CORRECTION

Also used as a Pre-spray applicator and as a Truck Mount Back Up when used in conjunction with the Mytee 7303LX AIR HOG™ BOOSTER, a powerful and lightweight booster and extractor.*

Here is a first look at the DyeBold, being tested and showcased at at Chris Howell's Colorful Carpet Training in Jacksonville, FL.

WHAT OTHERS ARE SAYING

"I finally picked up my DyeBold machine on Friday and so with it all paid for and now in possession I was able to mess around with it over the weekend. Monday and Tuesday I put it through its paces at work. With all the heaters on the heat was excellent, very fast and that was from cold. If I started with hot water then the one heater was more than adequate. At 400 psi, damn, that’s fast and puts down a lot of dye. (Which I was prepared for). At 150 psi it was extremely controllable in awkward places where anything higher would have been over kill and messy. It’s very compact making it an easier in and out of a vehicle than any standard portable extractor. I needed to tweak the machine a bit to wire it up but that was known in advance as it needed wiring up for a 240 volt supply. Not the piddly 110 volts it would have come with... -Dave Altomstone, U.K. of  Bespoke Rug Restoration.

 


 

 

"I’ve said it before I’ll say it again… If I were still offering the services I would absolutely buy one of these machines. It’s specifically designed for the type of work that we do."

-Chris Howell, World Renown Master Dyer of Colorful Carpets.

Dan Udy trying out the DyeBold™️ Machine at a Colorful Carpets training
Dan Udy trying out the DyeBold™️ Machine at a Colorful Carpets training

"I’ve said it before I’ll say it again… If I were still offering the services I would absolutely buy one of these machines. It’s specifically designed for the type of work that we do." -Chris Howell, World Renown Master Dyer of Colorful Carpets.

 

"I finally picked up my DyeBold machine on Friday and so with it all paid for and now in possession I was able to mess around with it over the weekend. Monday and Tuesday I put it through its paces at work. With all the heaters on the heat was excellent, very fast and that was from cold. If I started with hot water then the one heater was more than adequate. At 400 psi, damn, that’s fast and puts down a lot of dye. (Which I was prepared for). At 150 psi it was extremely controllable in awkward places where anything higher would have been over kill and messy. It’s very compact making it an easier in and out of a vehicle than any standard portable extractor. I needed to tweak the machine a bit to wire it up but that was known in advance as it needed wiring up for a 240 volt supply. Not the piddly 110 volts it would have come with... -Dave Altomstone, U.K. of  Bespoke Rug Restoration.

DyeBold™ Machine Heated/Adjustable PSI (110v or 220v)

Product Brand: DyeBold™
Manufactured by Mytee Producs
  • US Model  (110V): $2,300 (additional $100 for 220V)
  • International Model: 220v/240v: $2,400
  • Machine Dimension: 21’’ x 12’’ x 27’’
  • Machine Weight: 70lbs.
  • Capacity: 9 gallon capacity machine (allows for 2 dye batches)
  • Pump: Adjustable 100-370 PSI
  • Standard Dump Valve
  • Built in Priming Valve
  • Heater: 2 Independently Activated 2000W In-Line Heaters
  • 2 Cords: 1 cord supports pump and 2000W heaters. The second cord supports additional 2000W heaters
  • Additional features: PSI Gauge, Built In Faucet Fill Hose, and Locking Casters
  • *Manufactured in USA by Mytee Products
  • Shipping Information: Weight 90lbs (includes box packaging). Box Dimension: 14"x 37"x31"
  • Manual of Operations

Box Content: DyeBold™ Machine and 2 power cords.

 IMPORTANT

 

*Store Machine in Temperature Controlled environment to prevent parts damage.

 

**Prior to turning on heaters, make sure to run pump through the machine for a few seconds, to fill heaters with water and prevent vapor lock.

Here is the video of the  first prototype at the Colorful Carpets Training.

7303LX Air Hog™ Booster - Mytee Products, Inc.

7303LX Air Hog™ Booster - Mytee Products, Inc.

Two LX motors are better than one.

Here’s a Mytee® product that’s about to become an indispensable part of your cleaning arsenal – the 7303LX Air Hog™ Vacuum Booster. But it’s actually much more than just a vacuum booster; use it as a stand-alone extractor.

Four Ways to Use your LX Air Hog™:

  1. With this specially designed Air Hog™ model, you add up to 250 CFM to your existing extractor for unmatched performance on long hose runs, giving you increased suction, leaving carpets dryer.
  2. This versatile unit can also be used as a stand-alone extractor with your Mytee T-REX™ or carpet wand.
  3. You can also “daisy chain” multiple Air Hog™ vacuum boosters to complete bigger jobs more efficiently, without unnecessary downtime.
  4. Only one outlet available? No problem. Use only one power cord to run a single vacuum motor. You will still have powerful performance with 180 CFM and 113″ of water lift when running one vacuum motor.

Features:

  • 7 gallon (approx.) tank
  • Dual exclusive Mytee® Ametek Hybrid vacuum motors
  • 225-250 CFM
  • 182″ water lift
  • Pumps out at 3.3 GPM
  • Float shut-off valve, auto pump-out
  • Durable roto-molded polyethylene housing that resists rusting and denting
  • Circuit locator indicator light
  • Lightweight unit at 40 lbs. allows anyone to carry this unit virtually anywhere
  • 3″ locking casters

Includes:

FAQ:

Can I use the Air Hog™ in conjunction with my truck mount? 
Yes. However, in order to avoid damage to the unit it is critical that you first turn on the vacuum motors on the vacuum booster. Then turn on the truck mount vacuum motors only after the vacuum booster vacuum motors are already running.

Water Resistant Switches
Water resistant switches add protection against dust and water intrusion.
Locking Casters
Locking casters provide stabilization and prevents any unwanted movement.
Lighted Power Cords
Lighted power cords indicator plug glows when the cord has power.
Cuff-Lynx™ Ready
Cuff-Lynx™ provide an easy connection for vacuum hoses.

CONTAINS CUL icon_2